Are TPO Roofs Good?

A TPO roof installation in process with workers and tools.

Learn Whether a TPO Roof Is Right For You

Commercial structures, like residential structures, in the Austin, Texas area need roofing materials that can sustain all types of weather. From the blistering summer UV rays to the hard rains and high winds of spring and the ice storms in the winter. One of the most popular choices in commercial roofing is TPO. Thermoplastic Polyolefin is a single-ply roofing membrane that is comprised of three layers: 

  • Polymer base
  • Polyester-reinforced scrim
  • A compounded top ply

Every type of roofing material has different requirements when it comes to repairing them, and TPO roofing isn’t any different, which has its own TPO repair process.

What is a TPO Repair Kit and What Components are Included in a TPO Repair Kit?

A TPO repair kit is designed for specifically a TPO roof with products such as: 

  • TPO patching compound
  • Seam sealant
  • Primer

There are detailed instructions included in each kit on how to perform proper TPO repairs for a variety of issues. Those issues include small cracks, tears, punctures, and larger damage that can happen during a Texas spring storm.

What Are the Downsides to TPO Roofing? 

TPO roofing membranes are a popular choice in Austin, Texas because of their durability and the seams are hot air welded. They have a high resistance to impacts, punctures, and tears, but they are not 100% immune to flaws that lead to issues. Some of those flaws that require TPO repairs include: 

  • Easily Punctured 

TPO roofing is highly puncture resistant, however, a commercial structure that has a lot of foot traffic could be easily punctured if the proper preparations aren’t used. This includes having it professionally cleaned so the foot traffic isn’t stepping on large gravel stones, dropped tools, and loose screws. 

  • Strict Warranty

Most TPO roofing manufacturers have strict warranty requirements.  They require TPO repairs to be made promptly by an authorized TPO repair specialist. The warranty is typically between fifteen and thirty years. If an additional warranty is offered at a cost, it is worth the expense. 

  • Degrading Adhesives

The most common need for TPO repairs is caused by the UV rays degrading the adhesive. The adhesives seal the membrane seams, creating a waterproof seal. Any punctures or tears should be immediately repaired to keep the seal in contact and protect the roofing. 

  • Longevity

A TPO roofing system that doesn’t have prompt and proper TPO repairs when needed will shorten the lifespan of the roof. TPO roofing has its downsides, but manufacturers are making improvements and still keeping it affordable.

How Does a TPO Repair Kit Work and What Types of Damage Can a TPO Repair Kit Fix?

An improper and quick TPO repair of any of the flaws we listed above isn’t worth the money and time saved. Having any TPO repairs completed by a professional roofing contractor that specializes in TP roofing is recommended. The steps a professional roofing contractor will take when doing any TPO repair job include: 

  • Proper Preparation: If the roof surface isn’t properly and thoroughly cleaned before making a TPO repair, the repair won’t last. It must be completely free from contaminants and dirt. Most TPO manufacturers have specialized cleaners available to roofing contractors that include a special cleaner-primer, a detergent wash, and a special rinse.
  • Patching: TPO repair for a puncture can be done with a hot-air welding tool and special patch material available from the manufacturer. 
  • Coverage: A TPO repair is not something a building owner wants to deal with, but if not done promptly and correctly, it can void the warranty. Any TPO repairs should be done by a professional roofing contractor for this reason. 

Are TPO Repair Kits Easy to Use? 

For an experienced roofing contractor that has the proper equipment and materials, yes, TPO repairs are easy. For the inexperienced though, the steps may seem easy to follow, but any shortcuts can result in causing more damage that needs professional TPO repair service. 

How Long Do TPO Repairs Last? 

The lifespan of a properly installed TPO roof is between 15 and 30 years, with an average of around 22 years.  The reflective surface minimizes the heat from the UV ray, keeping the building cooler in the summer. This is a big plus in Texas! 

If TPO repairs are done promptly when needed, and all the steps are followed as instructed by the manufacturer, can help the TPO roof reach a long lifespan of up to 30 years. 

Stay On Top! 

The key to getting the longest lifespan possible for commercial roofing material is maintenance and repairs. While your maintenance team may be able to complete a TPO repair job, you want to make sure they follow all steps, including a thorough cleaning before applying the TPO repair materials. Since your maintenance team has other duties, you need to determine if their time is better spent elsewhere, and hiring a professional roofing contractor is the better choice. 

What is Roofing for Agricultural Buildings?

Metal roof installation

What is Agricultural Building Roofing?

If you’ve ever been out for a drive on back dirt roads, you’ve undoubtedly seen old barns scattered about. Typically, they are slanted, maybe partially gone, made from old, old wood with tin roofing. Some have chicken wire patching, but that tin roofing, for agricultural buildings was common back in the day. 

Today, though, things are different, and for the best. Roofing for agricultural buildings is made of better grades of metal, as is the rest of the building. While wooden barns are still built, for a working dairy or livestock farm, a better-built structure is needed, including the roofing. 

Metal panels are used today when roofing agricultural buildings. This type of roofing gives the owner the ability to make their agricultural building functionality suit their needs, keeping it aesthetically pleasing along with other benefits. 

What are the benefits of metal roofing for agricultural buildings? 

Here are six benefits by choosing metal panels for roofing agricultural buildings include: 

  • Durability

Metal panel roofing for agricultural buildings is designed with durability as the main focus. Here in Texas, the weather comes with hailstorms, hard rains, high winds, and heavy snowfall. The climactic conditions here can switch from a cold winter to a wet spring and right into a hot summer. 

Metal roofing for agricultural buildings has a Class A Fire Rating, which is the highest possible rating, and they are non-combustible. They are hail-resistant and insect and pest-resistant, excellent for keeping feed and livestock safe. 

  • Long Lifespan

When operating and owning an agriculture or livestock business, a long lifespan of every aspect is important, including roofing for agricultural buildings. The need to replace the roofing every twenty years is not where the thousands of dollars need to be spent, but the need to protect thousands of dollars of livestock and supplies is a must. Metal roofing for agricultural buildings will last up to 75 years or longer when installed correctly and with proper maintenance, which includes regular inspections for damage. 

  • Financial Savings

The initial cost of metal roofing for agricultural buildings is higher than other options, but because they require little to no maintenance and won’t need to be replaced every 20 years. These two factors offset that initial cost, a long-term savings factor.

  • Environmentally Friendly

Metal panel roofing for agricultural buildings is often made from recycled materials and they can be recycled when they have reached their end-of-life, often on the same property for other purposes. This makes them 100% recyclable at the end of their lifespan. 

  • Easy Installation

Not only are metal panel roofing for agricultural buildings offer fast installation, but they are also efficiently cut to the closest quarter of an inch prior to installation so it will align perfectly with the agricultural building.

  • Flexibility

When metal panels roofing for agricultural buildings are installed, the owner has choices in colors, finishes, and profile. In Texas, where the summers are brutal, choosing a lighter color that reflects the heat is a popular choice, making the building more energy efficient and the housed livestock cooler.

What considerations should be taken when choosing a roofing material for an agricultural building? 

In addition to the longevity of metal roofing, there are the following six considerations that you want to use when choosing the right roofing for agricultural buildings: 

  1. Initial Cost
  2. The Roof Slope
  3. Weather Resistance 
  4. Maintenance and Upkeep
  5. Energy Efficiency
  6. Weight 

What other types of roofing materials are used in roofing for agricultural buildings? 

With the vast types of roofing materials for agricultural buildings, it can be daunting to choose the “right one”. In addition to the bottom line (cost), there are also concerns with the engineering and benefits offered, as well as the aesthetic aspects, fire, hail, and insect resistance, and the insulating value. Other choices to consider include: 

  • Wooden Roofing Shingles:  This is the oldest roofing material but remains popular for housing and agricultural settings. Installation is easy, the initial cost is low, and they can last up to 30 years if maintained. Where fire was a concern for many years, today they are treated with a fire-resistance product. Even once they have aged, they still shed water for a few more years. 
  • Asphalt Roofing Shingles: If fire and the history of wooden shingles are a concern, asphalt shingle roofing for agricultural buildings is a popular choice. However, in areas with historic high winds, asphalt shingles may not be the best choice. Available in many different colors and shapes, they are lightweight, eliminating concern if the structure is stout enough. The average lifespan is between 12 and 18 years in most cases. 
  • Asbestos-Cement Roofing Shingles: This asbestos and cement roofing has not been used for agricultural buildings for very long but is becoming more popular. Installation is easy, and they are durable and fireproof, but they do have a higher cost initially compared to asphalt shingles or wooden shingles, but come in a variety of colors with rough or smooth surfaces and designs. 
  • Slate Roofing Shingles: The cost can be low if the slate is quarried locally. The thickness varies and requires an experienced roofing contractor to install, using copper nails. Engineering inspection is required to assure the stability of the structure can hold the weight of a roof with a J4 pitch or more. 

What is the most common metal used to roof agricultural buildings?

The two most common types of metal used for roofing agricultural buildings are Galvanized and Galvalume. The galvanized substrate is coated with zinc alloy ad the Galvalume substrate is coated with zinc plus aluminum.

Is there concern about lightning striking metal roofing? 

Lightening striking metal roofing for agricultural buildings isn’t any more of a concern than it is for a residential structure. But understandable, just as for a homeowner, likewise for an agricultural building that houses animals, equipment, and supplies, the concern of lighting and fires can be devastating for the owner. 

Yes, metal is a conductor of electricity, but when metal roofing is struck by lightning, the lighting is quickly conducted toward the ground or other nearby conductors. The danger of lightning striking a house is from the heat it generates causing a fire. Because metal roofing is fire resistant, that eliminates that concern. 

Is cell phone service disrupted by metal roofing? 

Whether we’re in our homes, office, car, or agricultural buildings, our cell phones are with us these days. While many people have the opinion that we’re too connected to our devices when the agricultural building is on the other side of the farm or ranch, they can be convenient and even lifesaving. So, is there a concern that your cell phone won’t work under metal roofing for agricultural buildings? 

Before we answer that question, let’s take a moment to consider that we use our cell phones in malls, office buildings, and stores without an issue. The same is to be said with metal roofing for agricultural buildings. There isn’t any evidence that cell phone signal isn’t going to be disrupted any more than with other roofing materials. 

If there is cell phone disruption under metal roofing for agricultural buildings, there are several possible problems causing this, like landscape. An agricultural building that is located in a deep valley could have problems with cell phone reception. 

What are the different installation methods of metal roofing? 

There are three different methods of how metal roofing can be installed. The roofing contractor will make suggestions based on the size of the structure and the surrounding environment. The methods they consider are: 

  • Standing Seam: This metal roofing method uses mechanical seaming and is installed over a solid substrate, or it can be installed over an open roof frame. 
  • Concealed Fastener: This method uses clips or fasteners and is installed with a waterproof membrane over the substrate with the metal panels installed next.
  • Exposed Fastener: This method of installing a metal roof is done over a solid substrate or ab open frame, leaving the screws exposed. 

In Conclusion 

In addition to choosing the best metal for roofing agricultural buildings, it is important to choose the best grade and best quality of metal. Using a quality roofing contractor with experience in metal roofing is important so that the job is done correctly. If you would like to learn more about roofing for agricultural buildings Austin, TX, you can reach out to us at 512-617-7335. Our roofing team would be happy to help!

Is a Metal Roof a Good Choice for My Building?

installation of a metal roof

Is a metal roof a good choice for my building?

When you first mention installing metal roofing systems on structures in Texas to someone, they might look at you like you’re crazy. Isn’t this part of tornado alley, where hailstorms and high winds blow through? It can get pretty hot too, right? And with all that in mind, aren’t metal roofs noisy and distracting? 

In this article today, we’re going to talk about the positives of metal roofing systems and why a standing seam metal roof is one of the best roofs to have here in Texas. For either a commercial structure or residential property, metal roofing systems have so much to offer, you’ll wonder why you didn’t have one installed sooner. 

Is it cheaper to get a metal roof or shingles?

Upfront, absolutely not! A metal roofing system is going to cost more with the material and the installation. However, because metal roofing systems have a longer lifespan than asphalt shingle roofing, you get more ROI. That means in the long run, yes, metal roofing systems are less expensive than asphalt shingle roofing. 

Are metal roofs better than shingles?

Neither one is really better than the other. Some metal roofing systems may be better than others, just like some asphalt shingles are better than others. What determines which is better – a metal roofing system or asphalt shingle roofing – will start with your budget. Which can you afford when you need new roofing? 

The next decision-maker is the environment, your long-term goals, and your architectural design preferences. Metal roofing systems are often referred to as the Cadillac of roofing because of their cost. However, this fun little turn of phrase doesn’t specify which type of metal roofing system is the “Cadillac”, and there are different types available for both commercial and residential structures.  For either a commercial or residential property, your choices in metal roofing systems are as follows, each providing its own benefits and drawbacks.

  • Aluminum: A popular choice for coastal climates because of its corrosion resistance. This metal actually reacts instantly to its atmospheric conditions in a positive way, which is why it is so expensive. For budget purposes, you may consider metal roofing systems that use an aluminum coating instead.  
  • Copper: This material has been used for centuries, and some copper roofs are still standing today in many parts of the world as the original roofing material. A soft metal, it can be quieter than some other options, though this also makes it vulnerable to denting. It is completely recyclable, making it popular among those concerned with the environment, though it is not a budget friendly material.
  • Steel: If recycling is your concern, steel is the choice of all metal roofing system. Made from iron and other elements, it has been used in every building aspect possible for commercial structures for decades and has become a popular choice for residential construction in recent years.  
  • Zinc: For aesthetics, this is not the first choice because of the chalking that can occur.  The natural properties make it easy to form, making it popular for commercial properties that have amazing and different shapes for their architecture. The chalking can be cleaned, but if low maintenance is your goal, Zinc metal roofing systems aren’t for you. 

Can I put a metal roof over shingles?

Maybe and maybe not. It will depend on the condition of the current asphalt shingle roofing and the contractor installing the metal roofing. Not all roofing contractors will guarantee their installation of metal roofing systems when it’s installed over existing asphalt shingle roofing. Another consideration is the insurance – homeowner’s insurance doesn’t always provide coverage for roofing that is installed over other roofing materials, regardless of the material. 

When it comes to installing metal over asphalt, it isn’t a matter of the weight because metal roofing systems are the lightest weight roofing options in the industry. In regard to cost, yes, it will be cheaper if the contractor can and does leave the existing roofing material in place.

Does a metal roof lower your insurance?

There are a lot of factors that are considered when it comes to quoting homeowners or commercial structure insurance.  For homeowner’s insurance, a brick home will be cheaper than a wooden structure. For commercial property, the type of business that is conducted will affect the insurance rate. 

Because metal roofing systems are typically more durable, making them more damage resistant, the insurance company may see them to be less risky. However, it will depend on the type of metal roofing systems you choose too, as copper is easier to dent than steel. So, it isn’t as if you’re being rewarded for choosing metal roofing systems over shingles or other types of roofing with cheaper insurance. It is the material itself that is getting you the cheaper rate. 

Are metal roofs low maintenance?

Not really – this is just basic common sense with the surface maintenance required, which can be done with your routine inspections to make sure all is in place and secured. While you can do this yourself, remember that roofs are higher than they look from the ground, and the slope is steeper. Hiring a  professional maintenance service may be a better, and safer, solution. 

Keeping it clean of any debris, leaves, limbs is also recommended. The frequency of the cleaning, maintenance, and inspections will depend on the environment where you live. In a mild climate, you can schedule this process every 18 months. In climates where the weather can go from one extreme to the next, or you have a lot of trees, once a year is recommended.  

building with standing seam metal roof

A Few Last Words On Metal Roofing Systems

Always a concern is “Will metal roof rust?” and if it does, “Can a metal roof be painted?” For what metal roofing systems cost, you don’t want to spend money on something that isn’t going to look good forever, right? Well, yes, metal will rust if it doesn’t patina. However, there are coatings that can be applied prior to or after installation that will fight that oxidation and rust.

As far as painting metal roofing systems, yes, you can. However, it will take some prep work no matter what the paint can says. You also need to know that once you paint it, it will need to be repainted every three to five years to keep it looking good.

Which metal roof is right for you?

Modern home with metal roof.

The Increasing Popularity of Metal Roofing

There was a time that you could only find a metal roof on barns. But today, metal roof installation is happening on commercial structures and residential structures of all sizes. Commercial metal roofing isn’t all that new, and if you look around some neighborhoods, you may find that metal roof installations have been taking place for a while now. 

Why metal roofing? 

There are a few reasons many businesses and homeowners have gone with metal roof installation in recent years: 

  • Longer lifespan
  • Water, snow resistant
  • Fire resistant
  • Insect resistant
  • Rot resistant
  • Mildew resistant
  • Longer warranty – up to 50 years

Metal roofing sheets are lightweight, making a metal roof installation cheaper and faster. Available in steel roofing and aluminum roofing, the gauge of metal roofing is lighter than clay tiles by 15 times and 18 times lighter than concrete shingles. 

Metal roofing also has radiant barrier reflectivity that will protect the structure from radiant heat. To have a radiant barrier with other roofing materials, special insulation must be added, making the cost of metal roof installation cheaper yet again. 

What are the different types of metal roofs?

There are proven advantages to getting metal roof installation on a home as a long-term investment. The durability and sturdiness metal roofing offers, as well as the longer lifespan and low maintenance needs, are definitely pluses. With up to an 80-year lifespan, a metal roof installation will likely be the last roof installation a homeowner will need.

Metals commonly being installed on homes today include: 

  • Aluminum 
  • Copper 
  • Corrugated 
  • Metal Tile 
  • Metal Slate 
  • Standing Seam 
  • Steel 
  • Tin 
  • Zinc 

For commercial structures, metal roof installation is a popular choice mainly because of the cost and durability. Like homeowners, a commercial structure owner will probably never have to worry with another roof installation once they have a metal roof installation.

For commercial structures getting metal roof installation, aluminum or steel in a standing seam style is the most popular choice. Steel is color-coated galvanized or galvalume steel, matching the building’s architecture. With a steel metal roof installation, some building owners choose raw metal panels and let them weather naturally. 

Can metal roofing go over old material?

Typically, because metal roofing material is of a lighter weight, the additional weight on an existing roof isn’t a problem. For commercial or residential structures, it is recommended to verify building codes when shopping for metal roof installation. The roofing contractor will probably do the same thing, but you’ll know ahead of time and not be surprised. 

With a commercial or residential metal roof installation, you need to verify with the roofing contractor that there is ample ventilation for the existing roof. While the metal roofing won’t be as much of a concern, the moisture build-up from a lack of ventilation can be a problem for the rest of the structure. 

Which metal roofing is best?

A metal roof installation on your home or business is an investment for the long-term, whether you will live there or place the up house for sale. Any potential buyer will appreciate the long service life the roof will give them and the curb appeal you’ll enjoy is endless. This is a durable, weather-resistant addition that will help reduce your utility expenses. Aluminum, copper, Galvalume, stainless steel, or zinc are all great choices. Your budget will be key to the decision, with copper being the most expensive. The architectural style of your home will be a factor in your choice as well. 

How energy efficient is a metal roof?

Because metal roofing reflects heat up and away from the structure, these roofs have been declared a highly energy-efficient roofing choice. A high-quality metal roof installation can save homeowners as much as 40% in energy expenses. 

For a commercial structure, a metal roof installation coated with a light color that reflects heat can be a tremendous energy saver, all without the need for added insulation. For commercial structures in colder regions, a dark color coated metal roof installation can help keep a building warmer with less help from the heating system. 

Commercial building with metal roof.

Topping Things Off With Additional Information

There are a few other things to bear in mind when it comes to metal roofing.

  • A metal roof doesn’t have to look like a metal roof – a big plus for residential architects. They can look like shingles and still give you the durability of a metal roof installation. 
  • Metal roofing is no longer for old barns in the country or high-end real estate. 
  • Metal roofing isn’t going to be any louder than other roofing materials when installed correctly over a substrate.
  • Metal roofing does not attract lighting and if hit by lighting, isn’t a combustible material. 
  • Insurance companies tend to favor metal roofing with some discounts. 
  • Metal roofing is good for low sloped roofing as well as pitched roofing. 

Downsides to a metal roofing installation include the expense, though this is offset by the longevity they offer. Another downside is hail can damage certain types of metal roofing like aluminum or copper. A structure in an area prone to hailstones should go with a steel metal roof. Keeping this all in mind can help you make a great decision when choosing your new roof. If you’re ready for more information, contact the Texas Cool Roofing & Waterproofing team by calling 512-617-7335 today.

How Do You Repair Asphalt Shingles?

close up of asphalt shingles

First of all, can you patch an asphalt roof?

No matter where you go in Texas, you’ll find asphalt roofing is on more homes than any other type of roofing material. That’s true all across this country. Why? Because it is the least expensive roofing material, easy to install, and asphalt shingle repairs can be easy enough for a homeowner to do it themselves. 

In our article today, we’re going to answer some questions about asphalt shingle repair for those who haven’t tackled that task yet. A lot of homeowners prefer to search the internet for “A roofer that does asphalt roof repair near me”, and that’s okay, in fact it is the safer option. For the homeowner on a tight budget (and who isn’t these days!), then the answer to the following questions can give you the basics for asphalt shingle repair. Then you can do a YouTube search for specifics or talk to a pro at your local big box home improvement store. 

On your monthly walk-a-round the house inspection, if you notice any damage to the roof, immediate action for asphalt shingle roof repair is needed. You may think that one shingle askew, bent, or cracked isn’t that big of a deal, and it may not be, right now. 

Even the slightest issue will allow water to seep under that one shingle, then it spread and begins rotting the wood sheathing. Ignoring even the smallest issue will create a bigger problem, and quicker than you think. Here, we offer steps and tips on how to do a simple asphalt shingle repair yourself.  This can slow down any further damage so you can get ready for a professional repair or replacement: 

  • Climb up to the roof and clean out around and under the askew, bent, or cracked shingle. 
  • Apply a bead of roofing sealant where the shingle belongs and return the shingle or flatten it out. 
  • Put your weight on the shingle to press it down.
  • Apply a second bead of roofing sealant on top around the edges of the shingle or over the crack. 
  • Using a putty knife, spread the sealant around the edges of the repaired shingle. 
  • You can camouflage this asphalt shingle repair by gathering granules from the gutters and spread over that last layer of sealant. 

Can you glue a shingle back on?

Absolutely!  Just because one asphalt shingle comes off, doesn’t mean you need an entire new roof!  Keep in mind the asphalt shingles on your roof is made from fiberglass and organic materials. These two things make asphalt shingles resistant to UV and water damage, but sometimes the corners and edges of the single give in to the  sun. 

How do you repair asphalt shingles?

After a storm you notice a lifted or loose shingle, don’t ignore it. It is those small issues that immediate asphalt shingle repair can make the difference of not having a leaking roof in the near future. Fortunately, this type of asphalt shingle repair  is easy and you can do it yourself. 

LIQUID NAILS® has a roof repair adhesive that will stick to the wet surfaces of the asphalt roof, siding, or loose trim.  You can also do your own asphalt shingle repair using a bituminous roof sealant and caulk gun. Once you apply these adhesives, weight the shingle(s) down with a brick for 24 hours. 

Make sure dab a bit of the adhesive or roofing cement under the lifted shingles, and then nail it down, applying more of the  roofing cement to cover the nail head. This extra sealant will keep water from leaking around the nail. 

shingle roofing system

How do you seal a shingle roof?

Asphalt shingle get bent, crack, lifted up, and the nails come loose, setting them up for leaking. The metal flashing around the  chimney, in the valleys, and boots around the vent stack  come loose. Here are few tips on how you can fix these before the leaks start: 

Sealing Your Asphalt Roof

Asphalt shingle repair for  minor buckling or cracking can be sealed with an acrylic spray. While you’re spraying this acrylic formula over the buckled and cracked areas you see, look for other minor cracks and chips and spray the acrylic sealant over them. The acrylic formula will bond to the shingles, sealing them together to create a clear coating that provides ultraviolet radiation protection. 

Roofing Tar

Where you have shingles that are loose around the flashing, spread roofing tar with a brush. Fill any cracks and crevices or where the shingles and flashing are separated.  This is an easy asphalt shingle repair, but it is a messy task and anything the tar gets on will need to be tossed. 

Silicone Sealant

With a tube of silicone roof sealant and a caulk gun, you can fill cracks and holes or repair shingles that are bent and warped. Appy a bead of the silicone just below the bent or warped part, position back as it belongs then place a brick on top of the shingle to hold it in place. 

With the information we have provided here, you’ll see that asphalt shingle repair do it yourself isn’t as hard as you may think. Keep safety in mind with the ladder in firm position, a safety belt, goggles, gloves, and rubber sole shoes is always recommended. Call 512-617-7335 today for your asphalt shingle repair in Austin, TX.

What Is a Roof Restoration?

white roof

What is a roof restoration?

If you own a commercial building in Austin, Texas, you know how brutal the weather can be on the roof. We either have the hot sun beating strong UV rays on our roofs, or we have hailstone plummeting from the sky. Sometimes, we even have ice and snow, and all of this can happen within one month!  So, roof restoration has become a popular choice for commercial building owners. 

Roof restoration is just what it says: restoring an existing roof with coating products that are highly-engineered to make an existing, old, worn roof like new. Roof restoration can be done on existing roof with EPD, MOD-Bit, PVC, TPO, and some SPF roofs.

What is involved in roof restoration?

Somewhere along the lifespan of a commercial roof, leaks will be encountered and too quickly a building owner will simply have a new roof installed. If the leaks are addressed as soon as they are discovered, roof restoration will work just as well for a lot less money. 

A new roof requires the old roof to be torn off, adding to the already over-flowing landfills. A roof restoration in the right timeframe can cost half as much and be just as  durable and watertight as a new roof and includes a warranty too. A roof restoration process can be done more than once which resets the clock for getting the  more costly roof replacement . 

A roof restoration starts with the existing roof being thoroughly cleaned. Then any obvious repairs are done like cracks and holes. The re-coating material is applied, allowed to dry 24 hours and a second coating is then installed. All of this is done with little to no interruption to the daily activity and business for the owner. 

How long does a roof restoration last?

With a commercial roofing contractor that knows how to do a roof restoration properly, and with the building owner having the routine maintenance and upkeep don, a roof restoration can add another fifteen years to a commercial roof. 

Three things you can expect from a roof restoration are: 

  • Sustainability: Each year, our landfills have millions to tons of roofing waste dumped in them. By having a roof restoration, you’re being a part of the solution because your existing roof isn’t torn off, just added to. A roof restoration makes a commercial structure roof more energy efficient as well as environmentally friendly. Your commercial building with a roof restoration could be qualified for ENERGY STAR credits. 
  • Tax Benefits: On your business and property owner taxes, a roof restoration is considered a maintenance expenditure instead of a capital expense like a new roof replacement. That means you’ll pay less taxes for maintenance with the deduction and not capitalization. A commercial roof is depreciated on a thirty-nine year schedule where roof restoration can extend that a couple of times. 
  • Catastrophic Loss Prevented: When you realize your commercial building’s roof is deteriorating, you can’t ignore it and look the other way. The longer you don’t address the problem, the more damage it is causing. A roof restoration won’t be as expensive as a new roof and will “buy” you some time to get the budget in shape for a new roof while keeping your building, employees, clients, and products safe.

Can a roof be repaired instead of replaced?

Yes, often instead of a roof restoration or roof replacement choice, can be a roof repair is all that is needed.  The roof repair is possible if there are very few minor issues with the roof, like a cracks that have not gone very deep or small holes. 

What is the cheapest way to replace a roof?

When roof repair or roof restoration are no longer viable options, roof replacement is the only way to go. However, replacing a flat roof is a sizeable investment for anyone that owns a  commercial building, but when it is needed, it isn’t something to ignore or put off for long. There are several considerations and factors when it comes to a roof replacement, each having an effect on the scenario that can ultimately make the decision. 

The type of roofing material to be removed is a huge deciding factor. A multi-layer roof will cost more to replace because of the layers that have to be removed. A single layer roof like EPDM, PVP, or TPO won’t be as  expensive to remove before the new roof is installed. 

When it comes to the replacement roofing material,  PVP and TPO roofing membranes are good for longevity, strength, and UV reflection. EPDM is a good roofing material that is the less expensive way to go, making it the popular choice. 

black flat roof

How long do roof coatings last?

The performance of a roof coating used for roof restoration will depend on the condition of the existing roof, the installation of the roof restoration coating, and the maintenance afterward. With all done properly, it can extend a roof life expectancy by 10 years, maybe longer. 

The roof of your commercial structure is an investment for your investment. So when you need roof restoration and repairs, it is best to use a commercial roofing contractor that has experience in roof restoration. Ask for recent references and check those referenced as an inquiry on the service and the quality of the work. Anyone that has a commercial structure will understand why you’re following up and shouldn’t have any problem providing you feedback. Call 512-617-7335 today for your roof restoration needs in Austin, TX.

How do insurance roof claims work?

damage to a shingle roof

Can I claim roof damage on insurance?

With spring getting closer here in Texas, homeowners should be checking their homeowner’s insurance policies to make sure they have any coverage needed for storm damage. Especially check the stipulations for roof insurance claims!  

Insurance policies can be tricky and if you aren’t careful, your roof may not be covered for all types of weather damage. Most homeowner’s insurance policy cover roof damage, but it can be dependent on the cause. For example, homeowner’s insurance usually covers hail damage or tree damage, but you need to review your policy before filing that roof insurance claim (or before spring storms arrive is better!). 

What roof damage is covered by insurance?

Your homeowner’s insurance policy will have coverage on your dwelling (house) and that will provide coverage on the structure, which includes the roof, from certain damage and perils. Perils that are covered are fire, hail damage, and wind damage.

That means if the roof is damaged by hail or tree falls on the roof due to high winds, the dwelling coverage will pay insurance roof claims for hail damage. Anything damaged inside your home from the roof damage, your claim will be filed under personal property coverage.

What about the roof on your she-shed in the backyard?  That roof insurance claim will be filed under the other structures coverage if your policy has this coverage. This is one of the things you need to check now and if you don’t have it, consider having it added. 

You also need to review your deductible before filing a roof damage claim, or any type of claim on your homeowner’s insurance. There will be coverage limits too, and if this all confusing, call your agent today and review your policy. Ask your agent if your policy has any exclusions like hail and wind roof insurance claims. 

Should I call insurance or roofer first?

Is it raining and coming through your roof? Who is going to fix your roof, the insurance company, or the roofing contractor? As the homeowner, your priority should be protecting your family, home, and property. So, if your roof is damaged during a storm, you need to make sure your family is safe, and your property is safe. This requires the experience and skills of a roofing contractor. 

After the roofing contractor has inspected the damage and entire roof, they will give you a written estimate with details of the damage and what needs to be done to make it right. Then you call your insurance company. 

In case of a roof leak, remember these steps:

  • Secure your family to safety.
  • Secure your property from further damage.
  • Call a roofing contractor.
  • Call your insurance company.

Does insurance cover ceiling collapse?      

In most cases, yes, your homeowner’s insurance will honor your claim for a collapsed ceiling. You will need to pay the deductible and there may be limits to the coverage.  These are things you can confirm reviewing your policy or calling your insurance agent.   

Before the ceiling collapsed, was there a leak in roof, insurance claim could be held up as the insurance adjuster inspects the roof.  The adjuster will determine if the ceiling collapse was due to a roof leak because of homeowner neglect.  This is why even the slightest issue with your home should be reported to your insurance carrier, even if you don’t file a claim. 

damage on roof circled

Does insurance pay for replacing old roof?

Not just because you want a new one, no.  Roof insurance claims are covered by most homeowner’s insurance policies when there has been damaged sustained by acts of nature or unexpected accidents.  If your roof is simply aging and looking worn out, or it has been neglected and a roof leak has occurred, your roof insurance claim will be denied. 

A typical homeowner’s insurance policies have a clause that stipulates the owner is responsible all routine maintenance of the home. This includes gutter cleaning and repairs, roof cleaning and repairs or replacement, replacing any broken doors or windows, etc. Why? 

Because while those things may seem minor, if they are neglected, they can lead to further damage to the structure of the home. The insurance companies need homeowners to do their part in regular maintenance and upkeep so there are less claims, including roof and siding insurance claims and more. 

So, can an insurance company require a homeowner to replace their roof? No, but they can decline to renew your policy if they note the roof needs repair or replacing. If you ignore their request to repair or replace your roof, they will decline coverage citing owner negligence. 

 As we have stated in this piece several times, review your homeowner’s insurance policy now before spring storms arrive.  Reviewing your policy two or three times a year is always a good idea and when you do file a  roof insurance claim, or a claim for anything, you won’t be surprised to get a claim denied letter in the mail instead of a roof insurance claim check you were expecting. Call 512-617-7335 today for roof insurance claim repair in Austin, TX.

What are the Different Types of Roof Tiles?

What Are the Different Types of Roof Tiles?

Would you like to discover more about the roofing tiles that are available for you? If so, please read over the following list to discover more.

  • Slate. This type of roof tile is natural stone and it has a uniquely striking appearance. Slate is a premium roof product and is highly fire-resistant and long-lasting.
  • Metal. Metal is another premium roof product and is distinguished by their light-weight and sheer longevity.
  • Concrete. Concrete roof tiles are very heavy and require a reinforced roof structure. Nonetheless, they are a great roofing material because they are resilient and fire-resistant.
  • Composite roof tiles. Synthetic roof tiles are usually made from a mixture of man-made and natural materials. These have a lot of advantages, including custom color mizes for most patterns.
roof tiles

Which Tiles Are Best for Roof?

Tile roofing is an exceptional form of roofing, and is highly-regarded in the roofing industry. Metal roofing tiles are highly recommended because once they are installed, they can easily last a lifetime. Copper tiles are also known to last a long time, and in some cases will last over a century or more. Stone, ceramic, composite, bituminous, and concrete tiles all function in similar ways, with the overall difference being the composition and the weight. Your local, professional roofing company will have great information for you regarding what will work best for your household or property.

What is Better Roof Tiles or Colorbond?

If you are wondering about the difference between roof tiles or colorbond, it’s vital to consider the advantages and disadvantages. With regard to energy efficiency, tile and colorbond roofing materials provide thermal insulation for homes. Asphalt, concrete, and clay tiles will absorb heat, which is important to remember if you live in a particularly hot part of the county. Colorbond uses solar reflection technology to reflect the heat away from the household, which is an asset in many if not all circumstances.

Are Concrete Roof Tiles Any Good?

Are you wondering if concrete roof tiles are any good? With regard to durability, clay and concrete roof tiles outperform lots of different roofing materials. However, in a direct comparison between caly and concrete, clay is more durable. Clay roofing tiles can last over one hundred years, and that far outpaces concrete roofing tiles, which can have a max of fifty years. As always, you will want to refer to your local professional roofing company for specific estimates in your climate for future roofing installations.

How Many Years Does a Concrete Tile Roof Last?

Concrete roofs are exceptional and present a unique addition to the roofing material market. With regard to how long they last, please make sure to consult a professional roofing authority. According to online estimates, concrete tile roofs last anywhere from between fifty to one-hundred years. They are considered a cost-effective choice due to the fact that they exhibit such longevity.

Why Roof Tiles

Are you wondering why it would be a good idea to invest in roof tiles? If this is the case, then you should consider some of the worthy benefits. For instance, tile roofing is very popular because it is particularly weather-resistant. Both clay and concrete roofing tiles are quite durable and have the wonderful ability to withstand high-speed winds. 

When to Replace Roof Tiles

Knowing when to conclusively replace roof tiles is an important part of home ownership. If, when reviewing your roof, more than fifty percent of the tiles are broken or cracked, then it is definitely a great idea for you to invest in a full tile roof replacement. This is because trying to repair a roof with so much damage is not cost effective at all.

When to Repair Roof Tiles

Your roof tiles perform a valuable service. If one or more tiles are broken, then it is a good idea to invest in a few repairs to get your roof tiles back to their best form. It’s vital to remember that tile roofs do need maintenance from time to time despite the fact that they are quite durable and long-lasting. In addition, replacing one or two roof tiles is far less expensive in the long term when compared to a whole roof replacement down the line.

roof tiles

How to Tell if Roof Tiles Need Replacing

If you are in the middle of trying to purchase a home, you should invest in a proper roof inspection. Your local, experienced roofing professionals will be able to let you know if you have roof tiles that are in need of replacing. The roof over your head is important, so please do not skip this important step.

Why not reach out to us today for a consultation about roof tiles in Austin, TX? Access a friendly member of our team at 512-617-7335 now.

What Does Roof Coating Do?

Contractors Apply an Acrylic Coating.

What Roof Coating Does

Because flat roofs are so common on commercial buildings, almost every building manager or owner faces common problems with these types of roofs. Typically, the main problem faced is leaking due to water collecting on the roof. Instead of repairing these leaks over and over again—and spending more and more—many managers opt to apply roof coatings. These often elastomeric coatings go directly over the roof, forming a seamless barrier that seals pinhole leaks, and prevents new leaks from forming.

Coatings, however, are used for more than just a sealant to stop leaks. When it comes time to replace your commercial roof, you might instead want to opt for a roof coating. Instead of tearing off the old roof and installing a new one, you can have a coating applied to preserve the old roof, extending its life for several more years to come. As a money-saving replacement option, the coatings can be re-applied every 10 years or so to continue preserving your roofs.

Additionally, coatings are valued because they improve your building’s overall energy efficiency. They have highly reflective properties, protecting the roof from UV radiation, and keeping it cooler in the summer and warmer in the winter. If you are considering a commercial roof coating in Austin, TX, let the experts at Texas Cool Roofing & Waterproofing help you. We provide a complete range of cool roofing solutions. Learn more about our services by calling 512-617-7335.

What is the best roof coating?

When choosing a roof coating for your building, you have several types of coatings available. Each has different properties that will be valued more than others. Some of the most common include:

  • Acrylic: These are water-based coatings especially fitting for areas of high UV radiation in which reflectivity is required for improved cooling.
  • Asphalt: Very effective coatings to use on asphalt-based roof substrates and for colder weather.
  • Polyurea: A polyurethane-based coating that’s ideal for hail-prone areas or for roofs that get high roof traffic.
  • Silicone: Another coating valued for high UV reflectivity, silicone is really good for roofs exposed to heavy, frequent rainfall.

When to apply roof coating

If you’re planning to apply an elastomeric roof coating like silicone or acrylic, you want to make sure you apply it at the right time. Coatings need to be applied on warm, sunny days so it will dry and cure properly. Moisture always needs to be avoided. If it’s rained recently or rain is forecast, you want to avoid applying the coating.

How long do roof coatings last?

The thickness of the roof coating application will normally determine how long it lasts. Ideally, you want the coating to last about 10 years before you reapply it. Your location and weather conditions will also affect the coating’s lifespan. Different types of coatings also have different lifespans. Elastomeric coatings, for instance, often last longer than asphalt coatings.

Does roof coating stop leaks?

Preventing leaks is one reason people value roof coatings. Because the coatings form a seamless barrier over your roof, they help prevent new leaks from developing. Smaller leaks are also sealed up when the coating is applied. Before you apply the coating, you will need to repair any significant leaks.

A coating application is often the most cost-effective way to stop leaks. It’s certainly more effective and less expensive than repairing every leak on your roof. Most coatings also receive a 20-year watertight warranty and most coatings will prevent leaks well past their warranty period.

Do roof sealers work?

Roof coating and roof sealant are sometimes used interchangeably as terms for the same material, and sealants are very effective at preserving your roof by preventing leaks and improving energy efficiency. Other benefits include fire resistance and mold growth prevention.

How much roof coating do I need?

Generally, when using elastomeric roof coatings, the amount of coating needed will vary depending on the type of roofing you’re covering. For most flat roofing materials like foam, modified bitumen or built-up roofing you’ll need about 1 gallon of coating for every 50 square feet of roof. Metal roofing will also vary. Corrugated metal roofs need about 1 gallon of coating for every 80 square feet of roof, while smooth metal roofs need 1 gallon for every 100 square feet.

Can roof coating be applied over shingles?

Roof coatings are primarily used for commercial buildings and only rarely used for residential applications. When used for residential buildings, it’s usually for flat roofs. It’s normally not recommended to use coatings on asphalt shingles. The coating can shrink and cause the shingles to cup or curl, which loosens granules. Coatings can also seal in moisture and cause the roof deck to rot. In some cases, adding a coating will void manufacturer’s warranties. Building and zoning codes as well as HOA codes can also be violated.

A Roofer Sprays on a Roof Coating.

Can roof coating be used on wood?

Roof coatings can be applied to other surfaces besides roofs. You can, for instance, coat wood siding, but cautions must be taken not to completely seal the wood because the wood must be allowed to breathe. When applying a coating, you have to be careful to avoid trapping moisture.

If you are looking to install a roof coating for your commercial roof in Austin, TX, you can always count on Texas Cool Roofing & Waterproofing. See what we can do for you today by calling 512-617-7335.

What is a Cool Roof System?

cool roof

What is a Cool Roof System?

One of the most important things about a cool roof installation is that cool roofs are able to keep your property cooler during the summer months. But the question remains as to what exactly is a cool roof system. Cools roofs have been designed with the purpose of reflecting more sunlight and absorbing less heat than regular roofs. Cool roofs can be made out of all sorts of different roofing materials. For instance, cool roofs can be made out of a highly reflective type of paint or a sheet covering, or highly reflective tiles or shingles. Standard or dark roofs can reach temperatures of one-hundred and fifty degrees or more. That’s why it’s important to understand the benefits of a cool roof.

What is the Coolest Roofing Material?

There are lots of great cool roofing materials available on the market, thankfully. Metal roofs can bring about a solar reflectance of over seventy percent. This amount of solar reflectivity makes sure that buildings remain far cooler and lower the associated energy costs during the summer. Metal roofs are an attractive roofing option for both residential and commercial property owners. That’s because metal roofs can last a lifetime, and when they are properly maintained, will exhibit the increased durability that has become legendary in the roofing industry.

Do Cool Roofs Work?

If you are wondering about whether or not cool roofs work, you would be glad to find out that indeed cool roofs do work. That is because cool roofs reflect increase sunlight and absorb less heat than roofs. Traditional dark-colored roofs absorb lots of heat from the sunlight which makes them heat the building unnecessarily. Cool roofs stay far cooler in the midst of the damaging UV rays of the sun. In turn, cool roofs will transmit less heat into the building. Thus, if you live in an area of the country that has hot summers, it would behoove you to consider investing in a cool roof.

What Color Roof is the Coolest?

All colors on the light side of the spectrum will manifest a powerful solar reflectivity effect. That is why it is important to invest in lighter colors. While beige, tan, and light green will produce a great effect, white is the coolest color for cool roofing. White is also the most common color for cool roofing materials. 

What Color Roof is the Most Energy-Efficient?

As previously mentioned, cool roofs are actually roofs that are lighter in color than traditional, dark-colored roofs. Black asphalt or dark wood shingles will be far less reflective and will actually absorb heat into the roof and into the household. You can be certain that when you invest in a cool roof that you can receive the benefits of a cooler household or property during the summer.

Are Cool Roof Shingles Worth It

Are you wondering whether or not cool roof shingles are worth it? If so, please review the following bullet points to discover more about the advantages of cool roof shingles.

  • Cools roofs can reduce local air temperatures. This phenomenon is referred to as the urban heat island effect.
  • Cools roofs can lower peak electricity demand, which in turn can help prevent power outages.
  • Cool roofs can also reduce power plant emissions. Power plant emissions include carbon dioxide, sulfur dioxide, nitrous oxides, and mercury.

Is Cool Roofing

Cool roofs are considered by many in the roofing industry to be the way of the future. This is because cool roofs are a roofing system that delivers higher solar reflectance to the building. These cool roofs can also enhance roof durability and reduce both building cooling loads and the urban heat island effect. After all, aunty building with a dark roof will use more energy for air conditioning than a cool roof building. If you would like to reduce your energy use during the summer and reduce air pollution and greenhouse emissions, then you will want to invest in a cool roof.

Who Makes Cool Roof Shingles

There are many different roofing material manufacturers available who make cool roof shingles. One of the prominent roofing manufacturers is Owens Corning. Owens Corning advertises over 20 roof shingle choices that meet or exceed 20 aged SRI. SRI stands for the current aged Solar Reflectance Index minimum required for the Green Building Standards Code of Los Angeles County.

cool roof

Will Wetting the Roof Cool House

If you are wondering whether or not wetting your roof will cool the house, you will be glad to know that it is true. Water on the roof will help cool the home. It’s always best to consult with a roofing company when it comes to reviewing your cool roof needs.

Would you like to discuss a cool roof in Austin, TX? We can help. Please reach out to us at 512-617-7335 today.